Innovative Med Inc.-949.458.1897-Micro-Injecion Therapy devices: Inderm PSI, Inderm Basic Plus & Inderm Nappage

Multiwave Systems Hand LED Systems Portable Handheld LED units

Microdermabrasion Systems Crystal and Canisters Handpieces and Tips Reorder Parts Microdermabrasion Attachments

Cellumage Hydrabrasion

Facial Beds and Chairs Massage Beds and Chairs

Surgical Aspirators Lipoplasty Supplies

Breast Augmentation Instruments Transumbilical Breast Augmentation Instruments Markers and Templates Dissectors

Cannula Ordering

Cannula Handles Mangubat Instruments

Fischer's Lipo Filling Instruments Blugerman Lipo Shifting Instruments Power Cannula

Tip Options Orifice Patterns Handles and Hubs Special Instructions

Mangubat Fast Lipo Cannula Mangubat Fast Breast Dissector

Multiwave LED systems Hand LED systems

Microdermabrasion systems Crystal and Canisters Handpieces and Tips Reorder parts

Inderm PSI Inderm Basic Plus Inderm Nappage

Liposuction Garments 2nd Stage Garments Breast Augmentation Garments Facial Garments Vests and Binders Arm Garments Photo Cover ups

> Inderm Nappage - instructions

Next -->

Prior to using the Inderm Nappage carefully read all instructions. Remove the Inderm from the canvas case and place on a flat surface.

Charging the device:

Do not remove the battery from the device. To charge the device you will need the two components shown below:

Finally plug the power supply into a wall adapter
Allow the device to charge for a minimum of 2 (two) hours

_________________________________________________________________________________

Setting the Syringe Limit Switch:
Adjust for the syringe size being used, based on B-D Luer Lock syringes. This adjustment is to let the device know when the syringe has reached the end of its travel.

_________________________________________________________________________________

Installing a Syringe:

Standard B-D Luer Lock® syringes (1, 3, 5, or 10 ml/cc) are recommended for use with the device.

NOTE: Install the syringe with the needle cap on.

To Install the syringe,

First lift open the door of the syringe driver. Then slide it as far back as is needed to clear the syringe

Place the syringe plunger into the appropriate slot of the syringe driver. Be sure not to pull the syringe from the syringe from the syringe cradle, the syringe must be fully seated against the cradle to help prevent the syringe from sliding forward. Close the door of the syringe drive to secure the syringe in place.

1 2

Next -->

To place an order, print out our quick order form and fax your order to 949.458.7416, print form>>, or give us a call to place your order over the phone: toll free at 877.779.9492 or for orders outside the US call 949.458.1897.

Links:

	Inderm PSI
	Inderm PSI Features
	Inderm PSI Instructions
	Inderm PSI Volume per injection
	Inderm PSI Example Drops
	Inderm Basic Plus
	Inderm Basic Plus Features
	Inderm Basic Plus Instructions
	Inderm Basic Plus Volume per injection
	Inderm Nappage
	Inderm Nappage Features
	Inderm Nappage Instructions
	Accessories

Can't find what your looking for, seach within our site using yahoo search: